Transmissions Used - Revision history

IowaEagle at 15:23, 23 December 2005

2005-12-23T15:23:01Z

2005-12-23T15:21:00Z

‎Automatic Transmissions

2005-12-23T15:15:04Z

2005-12-23T14:59:23Z

2005-12-23T14:53:33Z

2005-12-23T14:53:03Z

2005-12-23T14:48:31Z

2005-12-23T14:46:06Z

2005-12-23T14:43:41Z

2005-12-23T14:43:18Z

@@ Line 49: / Line 49: @@
 Two wide ratio automatic transmissions were used in AMC Eagles.  Although the internals are the same as the Chrysler built Torqu Flite transmissions of the same model the number '''you must use a transmission from an AMC vehicle as the bell housings are different.'''  The model 904 with a conventional torque converter was used in four cylinder Eagles while the model 998 with a lock up torque converter was used in six cylinder Eagles.
-Models 904 and 998 are similar in size, appearance and operation but have some different internal components.  Major differences are in the valve body and the rear band.  The model 998 has a double wrap rear band while the Model 904 has a single wrap.  An external identifier is that the 998 has reinforcing ribs cast into the top of the rear servo boss on the case.
+Models 904 and 998 are similar in size, appearance and operation but have some different internal components.  Major differences are in the valve body and the rear band.  The model 998 has a double wrap rear band while the Model 904 has a single wrap.  An external identifier is that the 998 has reinforcing ribs cast into the top of the rear servo boss on the case.  NOTE:  If you use an auotmatic transmission not from an AMC Eagle you will need to replace the 2WD tail housing with the Eagle Transfer Case adapter housing.
 == AMC TF 904/998 ==

@@ Line 45: / Line 45: @@
 = Automatic Transmissions =
-== AMC TF 904 ==
+== AMC TF 904/998 ==
-== AMC TF 998 ==

@@ Line 43: / Line 43: @@
 </center>
-= Automatic Transmission =
+= Automatic Transmissions =
 == AMC TF 998 ==

@@ Line 24: / Line 24: @@
 == T4 ==
-<enter>
+<center>
 [[Image:shfitt4.jpg]]  Lubricant ATF (Dexron II or III) 3.5 pints

@@ Line 12: / Line 12: @@
 == SR4 ==
+<center>
 [[Image:shfitsr4.jpg]]  Lubricant SAE 85W-90; 3.3 pints  [[Image:sr4drain.jpg]]
 [[Image:s4rexploded.jpg]]

← Older revision		Revision as of 14:46, 23 December 2005
Line 14:		Line 14:

	[[Image:shfitsr4.jpg]] Lubricant SAE 85W-90; 3.3 pints [[Image:sr4drain.jpg]]		[[Image:shfitsr4.jpg]] Lubricant SAE 85W-90; 3.3 pints [[Image:sr4drain.jpg]]
		+
		+
		+	[[Image:s4rexploded.jpg]]

@@ Line 5: / Line 5: @@
 AMC manual transmissions provided synchromesh engagement in all forward gears.  Reverse gear is not synchronized.  All forward gears are helical-cut and in constant mesh.  Reverse gear is spur cut and not in constant mesh.
-'''All AMC manual transmissions were manufactured to metric standards.  When servicing these transmissions use the specified metric threaded fasteners only.'''
+'''All AMC manual transmissions were manufactured to metric standards.  When servicing these transmissions use the specified metric threaded fasteners only.  NOTE:  The gear shift lever attaching bolts ARE NOT Metric.'''
 The transmissions had an identification tag attached to the rear of the transmission which displays the AMC and vendor part numbers.  This information (if still attached) will be useful should you need to order parts.
 == SR4 ==
 [[Image:shfitsr4.jpg]]  Lubricant SAE 85W-90; 3.3 pints