Rollguy's Front Seat Angle Fix/Mod - Revision history

Smitch at 20:12, 30 July 2011

2011-07-30T20:12:32Z

Smitch at 20:10, 30 July 2011

2011-07-30T20:10:44Z

Whuntmore at 03:02, 30 July 2011

2011-07-30T03:02:12Z

Whuntmore at 03:01, 30 July 2011

2011-07-30T03:01:53Z

Whuntmore at 03:01, 30 July 2011

2011-07-30T03:01:35Z

Whuntmore at 02:59, 30 July 2011

2011-07-30T02:59:42Z

Whuntmore at 02:59, 30 July 2011

2011-07-30T02:59:19Z

Whuntmore: New page: I don't like the angle of the driver seat back (furthest forward notch), so I figured out a way to make it more upright. I removed the 3 torx screws holding the seat back hinge, and drill...

2011-07-30T02:58:16Z

New page: I don't like the angle of the driver seat back (furthest forward notch), so I figured out a way to make it more upright. I removed the 3 torx screws holding the seat back hinge, and drill...

New page

I don't like the angle of the driver seat back (furthest forward notch), so I figured out a way to make it more upright. I removed the 3 torx screws holding the seat back hinge, and drilled 3 more holes to the left (counter-clockwise) of the original 3. Use a compass to mark the centerline of the radius (I failed to do this, and had to use a die grinder to get the holes just right).

I used a speaker magnet to catch all the metal chips (worked great!).
[[Image:http://i84.photobucket.com/albums/k13/rollguy/Eagles/100_0474.jpg]]

Photo of the new mounting position:
[[Image:http://i84.photobucket.com/albums/k13/rollguy/Eagles/100_0475.jpg]]

Photo of the finished job:
[[Image:http://i84.photobucket.com/albums/k13/rollguy/Eagles/100_0476.jpg]]

Notice that both seats are in their forward most notch. I still have 2 more rearward notches to match the same angle as the passenger side.

← Older revision		Revision as of 20:12, 30 July 2011
Line 14:		Line 14:

	Notice that both seats are in their forward most notch. I still have 2 more rearward notches to match the same angle as the passenger side.		Notice that both seats are in their forward most notch. I still have 2 more rearward notches to match the same angle as the passenger side.
−
−
−	~~UNDER CONSTRUCTION...~~

← Older revision		Revision as of 03:02, 30 July 2011
Line 14:		Line 14:

	Notice that both seats are in their forward most notch. I still have 2 more rearward notches to match the same angle as the passenger side.		Notice that both seats are in their forward most notch. I still have 2 more rearward notches to match the same angle as the passenger side.
		+
		+
		+	UNDER CONSTRUCTION...

← Older revision		Revision as of 02:59, 30 July 2011
Line 2:		Line 2:

	I used a speaker magnet to catch all the metal chips (worked great!).		I used a speaker magnet to catch all the metal chips (worked great!).
−	~~[[Image:~~http://i84.photobucket.com/albums/k13/rollguy/Eagles/100_0474.jpg]]	+	http://i84.photobucket.com/albums/k13/rollguy/Eagles/100_0474.jpg

@@ Line 3: / Line 3: @@
 I used a speaker magnet to catch all the metal chips (worked great!).
+[[Image:rgs1.jpg]]
 Photo of the new mounting position:
+[[Image:rgs2.jpg]]
 Photo of the finished job:
+[[Image:rgs3.jpg]]
 Notice that both seats are in their forward most notch.   I still have 2 more rearward notches to match the same angle as the passenger side.